WANWEI 8034 H
[Introduction]
WANWEI 8034 H is a very strong hydrophobic dispersible polymer powder for dry mix mortars,specifically suited for tile grouts, renders and plasters, Skim Coats. It is based on a flexible terpolymer of vinyl chloride, ethylene and vinyl laurate.WANWEI 8034 H belongs to the product class WANWEI H which means that it provides a remarkable hydrophobic effect in addition to adhesion.
[Properties]
• WANWEI 8034 H is a hydrophobic, terpolymer powder of ethylene, vinyl laurate and vinyl chloride.
• It is dispersible in water. WANWEI 8034 H performs as binder and hydrophobizing agent.
• When blended with inorganic binders, the resin will provide improved adhesion, flexural strength, deformability and abrasion resistance and are easier to process.
• Due to the hydrophobizing resin’s special composition and production method, compounds modified with WANWEI 8034 H will have extensive and lasting water repellency on alkaline building materials and significantly reduced water absorption.
• WANWEI 8034 H contains a fine mineral filler as an antiblocking agent. It is produced without the use of organic solvents, plasticizers and film-forming agents.
• WANWEI 8034 H is highly hydrophobizing, has no effect on rheological properties and is a hydrophobizing powder in the lower Tg range. It is suitable for formulating compounds that must exhibit good very good water repellency. Optimum water repellency is obtained at a pH > 7.5.
[Specification]
| Property | Condition | Value | Method |
|---|---|---|---|
| Ash content | 1000 °C | max. 15 % | specific method |
| Solids content | – | min. 98 % | DIN EN ISO 3251 |
| Bulk density | – | 400 – 550 kg/m³ | DIN EN ISO 60 |
| Particle size | > 400 µm | max. 4 % | DIN EN ISO 4610 |
[General Characteristics]
| Property | Condition | Value | Method |
|---|---|---|---|
| Appearance | – | white to light beige powder | Visual |
| Minimum film forming temperature | – | 0 °C | DIN ISO 2115 |
| Protective colloid / emulsifier system | – | polyvinyl alcohol | – |
[Applications]
• Adhesive & Base-Coat Mortars
• Mineral Renders & Plasters
• One Component Cementitious Waterproofing Membranes
• Skim Coat
• Thermal Insulation Renders
• Tile Grouts
[Packaging]
25 kg paper bags Big Bags or bulk on request.
[Storage]
During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.